Snarayan July 23, 2021

The Netgear EAX20 mesh extender AX1800 is designed to give excellent WiFi capacity, high bandwidth, and increased coverage by utilizing the newest generation WiFi 6 technology. All that remains is to complete the Netgear EAX20 Setup and experience a far more connected home. With the WiFi range extender, you can obtain faster WiFi rates of up to 1.8 Gbps even in the most remote part of your home.

All of your wired users would be supported by the mesh extender’s 4-stream WiFi and more geographical streaming, which offer greater accessible bandwidth and lower latency. The EAX20 Extender is suitable for medium-sized houses.

Setup instructions for the Netgear EAX20 AX1800 WiFi range extender can be found here. Let’s just get this party started!

Netgear EAX20 AX1800 | WPS Method

To configure the Netgear EAX20 AX1800 using the WPS push button, follow these steps:

  • Link the dual-band WiFi mesh extender to the internet using a standard Ethernet cable.
  • Keep the WiFi router and extender in the same approximate location
  • Whenever you leave the house, make sure your extender is connected to a power outlet.
  • Wait for the EAX20’s Power LED to turn green before starting.
  • On the extender, press and hold the WPS button.
  • In this case, the connection between your router and extender is excellent, and the Netgear EAX20 Setup LED illuminates white.
  • Make the necessary adjustments to the location of your extender.
  • You should bring your WiFi-enabled laptop or mobile computer to an area where WiFi router coverage is limited.
  • Connect to the Extender network using a laptop or mobile computer that is equipped with WiFi.

That’s how you complete your Netgear EAX20 installation using the WPS button. If you encounter any technical difficulties throughout the installation process, please contact our technical support team.

Setup Guidelines for the WiFi Mesh Extender (Manual) Follow the steps outlined below to configure the AX1800 4-stream WiFi mesh extender on your own computer:

  • Link your Netgear AX1800 dual-band WiFi mesh extender model EAX20 to the internet via a wired or wireless connection.
  • Use a close range to your router while placing the WiFi extender.
  • After that, connect the extender to a source of power to finish.
  • Do not proceed until the Power LED has changed to a green color.
  • If the Power LED does not illuminate, press and hold the Power button.
  • Connect your Netgear WiFi range extender to your network using either WiFi or Ethernet.
  • On a computer or mobile device, open a web browser and type mywifiext.net into the address bar.
  • If mywifiext.net does not appear to be running on your device, please contact our support team immediately for assistance.
  • The login screen for the Netgear EAX20 appears.
  • The on-screen instructions will guide you through the process of connecting your extender to an existing WiFi network.
  • Make the necessary adjustments to the location of your extender.
  • If for any reason the extender is not connecting, try moving it closer to the router and retrying until the Connection Status LED becomes white.
  • As soon as you’ve determined the optimal placement for your extender, connect your client PCs to the WiFi network of the extender.
  • For more assistance with your Netgear EAX20 AX1800 Extender configuration, please contact one of our highly skilled technicians for assistance.

Firmware Update for Netgear EAX20 | AX1800

Is your WiFi extender behaving weird recently? Is there still insufficient speed despite a solid Netgear WiFi extender setup? If this is the situation, you can immediately upgrade the firmware on your Netgear extender. Follow these procedures to upgrade the firmware on a Netgear extender:

  • First, make sure your WiFi extender is turned on.
  • Join the modem and the extender.
  • Next, open your preferred web browser.
  • In the address box, type Mywifiext login and press enter.
  • Log in to the extender with your username and password.
  • To upgrade the firmware, go to the setup menu and select Firmware Update.
  • On the following screen, click the Check button.
  • If a new version of the Netgear EAX20 AX1800 firmware is available, select Yes.
  • Give the firmware on the Netgear extender setup time to patch properly.
  • This brings us to the end of our conversation.
  • The firmware on your extender has been updated. Please do not hesitate to contact our professionals if you encounter any problems.

Leave a comment.

Your email address will not be published. Required fields are marked*